top banner www.iotaengineering.com
   ETS-DR Emergency Control Device Specification Sheet in PDF format Installation Manual in PDF format Wiring Diagrams
Lumen Output
Full light output

Lamps Operated
Allows use of local switch and/or dimming controls for a designated LED, fluorescent, or incandescent fixture connected to an auxiliary generator or inverter supply up to 3 amps continuous.

Product Description

The IOTA ETS-DR Emergency Lighting Control Device allows local switch and dimming control of designated emergency luminaires when emergency power is provided by a generator or inverter. The ETS-DR senses the loss of normal AC power and bypasses the local switch device or dimmed setting, allowing emergency power directly to the fixture regardless of control setting. The ETS-DR is rated for any lamp load up to 3 amps continuous power including LED loads per NEMA 410 standards. The ETS-DR is an ideal solution for achieving increased energy savings in accordance with most energy efficiency standards by eliminating the need to operate the designated emergency fixtures 24/7 when emergency power is sourced from a generator or inverter. The dimming relay leads of the ETS-DR interface with the fixture’s dimming control for proper emergency operation of the fixture from the designated auxiliary supply


Product Specifications

Input Voltage: (Dual) 120/277V 60Hz

Input Current: 250 mA

Max. Switching Voltage
3 Amps @ 120V
3 Amps @ 277V

Circuit Protection
3A on Control Input
3A on Neutral and 120/277V outputs

Dimming Compatibility


For use in 0-10 volt dimming circuits up to 100 mA

Emergency Operation


The ETS-DR allows operation of any lamp type in the designated fixture for the duration of the auxiliary supply.

Initial Illumination The ETS-DR allows operation of any lamp type in the designated load at the full output of the lamp

Operating Temp 0° to 55° C

Weight 1.0 lbs

Approval




UL 924 Listed
   PRODUCT ADVANTAGES
  • Regain local switch control of your designated emergency fixtures powered from a generator or inverter

  • Promotes energy savings by eliminating the need for always-on fixtures

  • Dimming Relay Leads allow the use of energy-saving dimming controls on the fixture without the need for additional devices

  • Full light output

  • Compatible with LED loads up to 3 amps continuous in accordance with NEMA 410

   FEATURES
  • Shunts local switch devices in the emergency mode allowing for full lumen output

  • Rated for LED loads up to 3 amps continuous per NEMA 410 standards

  • Galvanized steel case

  • Dual Voltage 120/277V 60Hz

  • Rated for use in plenum fixtures

  • 5-year warranty. See Warranty Page for details.

  • Meets or exceeds all NEC, IBC, and Life Safety Code Emergency Lighting Requirements

  • RoHS Compliant



Dimensions

8.0" x 1.18" x 1.15" (Mounting Center: 7.5")

ETS-DR Emergency Control Device Dimensions




IOTA Links

Home Page

LED Emergency Drivers

IIS Series Inverters

Fluorescent Emergency Ballasts

Exit Signs and Emergency Fixtures

Product Links

Specification Sheet

Installation Manual

Wiring Diagrams

Technical Library

Contact IOTA

IOTA Directory

Request Literature

Find Your Local IOTA Sales Representative

Technical Services Page


T: 1-800-866-4682  •  F: (520) 741-2837  •  PO Box 11846 Tucson, AZ  •  1361 E. Wieding Road Tucson, AZ 85706

© 2017 IOTA Engineering, L.L.C, Tucson AZ. All Rights Reserved.